Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.

Brake Caliper Test Stand
Model 2636

System Features
  • ProLink™ Software
  • Two Brake Apply Systems
  • Cylinder Burst Testing
  • 6 LVDTs for linear measurement
  • 3 Pressure Transducers: 200, 3000, 7500 psi
  • Fluid Displacement Measurement
  • Mechanical Actuator for Slide Force Measurement
  • Stainless steel bench
  • T-Slot Base for fixture setup

The Model 2636 Brake Caliper Test Stand is a versatile system that can perform a number of performance and durability tests of automotive brake components. The test stand uses a hydraulic power unit for durability testing and an electric brake apply for high pressure (burst) testing. All test control and data acquisition are performed using ProLink™ Software.

This test stand can also perform tests for piston roll back and piston knock back in automotive brake calipers. During knock back testing, a force may be applied directly to the piston by a linear actuator in order to stimulate additional piston movement.

The test bench is constructed from stainless steel over an aluminum frame. A nickel plated T-slot top allows a variety of test parts and fixtures to be mounted on the bench top to simulate real-life installations. A removable Lexan containment guard is included for burst tests. Linear measurement devices are mounted on magnetic stands with quick release bolts to provide proper stiffness for measurements.


Brake Caliper Test Stand
Model 2636

Maximum Flow Volume 98 cc
Flow Resolution 0.01 cc
Minimum Flow 0.2 cc / sec
Maximum Flow 160 cc / sec
Maximum Pressure 200 Bar
Pressure Resolution 0.7 Bar
Maximum Stroke 25 mm
Stroke Resolution 0.05 mm
Stroke Speed 0.1 – 220 mm / sec
Maximum Force 1000 N
Force Ramp Rate 5-500 N / sec

Options
  • Linear motor acutuator
  • Different ranges for force, displacement, and pressure for other applications
  • Alternative arrangements for unique hardware

For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.